How do I go about deploying my water station?

• Related Articles

• I’m deploying a FieldKit Weather for the first time. What are your general recommendations?

  To ensure effective measurement with your FieldKit Weather station, your sensor cluster should be a minimum of five meters (15 feet) off the ground to avoid boundary layer effects. If you are using a solar panel, you should ensure that it receives ...

• Do you have water level sensors that can be connected to FieldKit Water?

  We have water level sensors, yes! Water level sensing is included in the Distance sensor pack. You can deploy your water level sensor in conjunction with other FieldKit sensors, anchoring the kit on land near the water line. You could also combine a ...

• Are turbidity sensors available for FieldKit Water?

  Not yet! However, we plan to develop these in the future. Stay tuned!

• I spilled the storage solution for my water pH probe. What should I do?

  The buffer solution used to store the pH probe is important for maintaining the equipment through its lifespan, thus you should replace it as soon as possible. In case of a spill, the solution will not cause harm to the skin but should not be ...

• Why is the temperature reading on my dissolved oxygen module different from the water temperature reading I'm getting?

  The dissolved oxygen module displays a temperature and pressure reading when looking at readings in the app. These readings are not measuring the water that the probe is in but instead reflect the air temperature and air pressure sensors on the ...